Page Comparison

You can configure values for the various components of the Call Management module. Based on the configuration, the values or fields are displayed for a Call Record raised for a Tenant.

To Configure Call Management Module:

1. Select Admin > Basic > Infrastructure > Tenant.

2. On the TENANT page under the LIST section, select the Tenant Name for which you want to configure the Call Management module.
   
   
   Figure: TENANT page

   Note
   title Note:
   On the above TENANT page, Department Code, Display Name, and Description about the selected Tenant is displayed. If the Active check box is selected, it indicates that the selected Tenant is an active Tenant. The various module configured, not configured, and disabled for the Tenant is displayed on the page by the different color check marks: Orange indicates not configured module Green indicates configured module Grey indicates disabled module

3. Click CONFIGURE DETAILS on the ACTIONS panel and select CALL MANAGEMENT under MODULES section. The details about the Call Management module are displayed under the DETAILS section. For more information about the fields on the DETAILS section, see Field Description.

   1. Type in the required details and make appropriate selections, and then click SUBMIT.

      Expand
      title THEME SETTINGS
      Figure: TENANT page: Configuring Call Management module - Theme Settings Field Description The following table describes the fields on the THEME SETTINGS section of TENANT page: Field Description THEME SETTINGS Theme Select the theme that you want to apply for the Tenant. Only the themes configured on the THEME CONFIGURATION page are displayed in the Theme drop-down list. Allow Users to Select Theme If selected, the users can select the Theme on the MY PROFILE pop-up page that they want to apply for the Tenant. For more information about selecting a Theme on the MY PROFILE pop-up page, see Viewing/Updating Your Profile Details in SummitAI Platform.

      Expand
      title DETAILS
      Figure: TENANT page: Configuring Call Management module - Details Field Description The following table describes the fields under the DETAILS section ofthe TENANT page: Field Description DETAILS Call to Incident Routing Log New Incident: By default, the Log New Incident option is selected and the Analyst is navigated to the New Incident page while converting a Call to an Incident. The Call details, such as Tenant, Caller, Call Subject, Call Description, Workgroup, and Assigned To get auto-populated on the New Incident page. The Call Attachment is not visible on the New Incident page, however, after the Incident is logged, the Attachment is available on the Incident Details page. Log New Incident for User: If the Log New Incident for User option is selected, the Analyst is navigated to the New Incident for User page while converting a Call to an Incident. Also, the Call details, such as Tenant, Caller, Medium, Call Subject, Call Description, Attachments, Workgroup, and Assigned To are auto-populated on the New Incident for User page. Enable Change Caller Icon If selected, the Change Caller icon is available on the Call Record page for Internal Callers. This allows the Analysts to change the Caller of a Call Record. Figure: Call Record Details page Notifications are sent to the new Caller only if there are any subsequent changes. Example: If the Caller Type or Status is changed, notifications are sent to the new Caller. Notifications are sent in the following cases: To the Assigned To user if the Workgroup is changed. To the Caller userif the Status is changed. Both Assigned To and Caller users if the Type is changed. Note title Note: The notifications are sent only for the Internal Callers. An Internal Caller cannot be changed to an External Caller or vice-versa. The Analysts can change the External Callers using the Edit External User icon on the Call Record page. Image Modified Figure: Call Record Details page: Edit External User Icon Note: The Change Caller or Edit External User icon is available only for the Enquiry Action Call Types records. It is not applicable for the Incident Action and SR Action Call Types records.

ACTIONS

This section explains all the icons on the ACTIONS panel of the TENANT page.

SHOW LIST

Click SHOW LIST to display the LIST table showing all the configured Tenants.

Figure: TENANT page: List of Tenants

• To update a Tenant detail, click the configured Tenant Name. Make appropriate changes and click SUBMIT.
• To display the inactive Tenants, click the Include Inactive check box.
  
  

SHOW TENANT

Click SHOW TENANT to view the details of the selected Tenant.  

Anchor
Image in Mail-To-Ticket Image in Mail-To-Ticket

Image in Mail-To-Ticket