Select Operations> User > Risks > Correction Capability.
On the CORRECTION CAPABILITY page, click the Filters icon and select the Tenant and Device Type. Click SUBMIT. List of all the configured assets for the selected Tenant and device type is displayed.
In the <Risk Name> column, select the Correction Capability value for each asset in the event of the risk. For more information about fields on the CORRECTION CAPABILITY page, see Field Description.
Note:

The <Risk Name> column is configurable and there can be multiple Risk name columns based on the configurations done in the CONFIGURING RISK page. For details on configuring risks, see Configuring Risk AVM.
Click SUBMIT. The Correction Capability is configured.

Figure: CORRECTION CAPABILITY page

The following table describes the fields on the CORRECTION CAPABILITY page. The fields vary based on the selected Device Type.

Field	Description
Host Name	Displays the Host Name of the Network Device or Server. If the device type is a Network Link, instead of Host Name, Link Name column is displayed.
IP Address	Displays the IP Address of the Network Device/Server. This column is not displayed if the selected device type is Network Link. Instead, two additional columns, Source IP and Dest IP are displayed, which display the source and destination IP addresses for the Network Link.
Device Type	Displays the type of device.
<Risk Name>	Select the Correction Capability value for the device in the event of the risk.