Merged Releases

The following Releases are merged with this Release:

Customer Fixed Issues

Asset Management
Platform

This section describes the issues reported by the customers and their fixes in Denali SP1 HF20.

Asset Management

Issue ID	Issue Description	Scenario	Resolution
103264	The application was unable to display data in the Asset drop-down fields of the Add Asset page in the Asset Management Module.	Steps: Navigate to Asset > User > Manage Assets > Asset Inventory. Select Fixed Asset from the Select the Asset Type grid. Select the Tenant, which is a mandatory field. Click the desired Asset Category count hyperlink. Select ADD option from the right ACTIONS panel. Add Asset Details page is displayed. Select the Category from the drop-down. NOTE: Choose the category other than the previously selected category. Select the Store from the search icon. General and Relationship tabs are displayed. Under General tab, check the Make drop-down.	The Asset drop-down fields in the Add Asset page displays relevant data after the resolution.
99905	The Software Discovery details were not updated properly through SAM Agent in the Asset Management Module. The software “Docker Desktop” was installed on the End Machines which was not reflected in the Software Discovery section. NOTE: The SAM Agent version "2.2.4.35" was installed on the End Machine.	Steps: Navigate to Asset > User > Manage Assets > Asset Inventory. Select Fixed Asset on the Select the Asset Type page. Select the Tenant, which is a mandatory field. Select the desired Asset Category Allocated Asset count hyperlink. The Fixed Asset List page is displayed. Click the desired Asset ID count hyperlink. The Asset Details page is displayed. Select the Asset Information option from the left pane. Click the Software Discovery tab and verify the details.	The Software Discovery details of the selected Asset in the Asset Details page displays proper information after the resolution.
103483	The user was unable to export the complete records for the Software Assets in the Asset Inventory page when the EXPORT ALL option was selected, and the following filter conditions were selected: Software Type option for the Attribute Name filter field. License or Unlicensed option for the Attribute Value filter field. NOTE: The data was exportable before applying filters.	Steps: Navigate to Asset > User > Manage Assets > Asset Inventory. Select Software on the Select Asset Type page. The Software Details page is displayed. Select the Tenant, which is a mandatory field. Click the FILTERS option from the right panel. The FILTERS pop-up is displayed. Select the desired Tenant, Category, and Store from the drop-down which are mandatory fields. Select Software Type from the Attribute Name drop-down. Select the License or Unlicensed checkbox from the Attribute Value drop-down. Select the checkbox Show only Available Licenses. Click SUBMIT. The Software Details page is displayed. Select the EXPORT ALL option from the right actions panel. The excel sheet with software details is downloaded.	The excel sheet captures all the necessary software detail records and the EXPORT ALL functionality works successfully after the resolution.
103338	On the Asset Details page, the asset information was blank when the User ID was deactivated from the application. The following fields displayed blank data: Added By Updated By	Steps: Navigate to Asset > User > Manage Assets > Asset Inventory. Select Fixed Asset on the Select the Asset Type page. The Fixed Asset List page is displayed. Select the Tenant, which is a mandatory field. Select the desired Asset Category and click the Asset count hyperlink. The Asset List page is displayed. Click the desired Asset ID count hyperlink. The Asset Details pop-up is displayed. In the Asset Information segment under the Asset Register tab, check the usernames mentioned in Added By and Updated By fields.	The fields Added By and Updated By, displays the deactivated usernames after the resolution.
117856	When the user clicked CI under the Relationship tab in Asset Details pop-up, an extra tab was opened.	Steps: Navigate to Asset > User > Manage Assets > Asset Inventory. Select Fixed Asset on the Asset Inventory page. Select the desired Tenant from the drop-down, which is a mandatory field. Click the asset count hyperlink of desired Status and Category. Fixed Asset LIST page is displayed. Click the desired Asset ID count hyperlink. ASSET DETAILS pop-up is displayed. Navigate to Relationship > Configuration Item. Click CI No and verify what is displayed.	The CI data works fine without any extra tab display after the resolution.

Platform

Issue ID	Issue Description	Scenario	Resolution
101800	In the New Incident page, Priority field was not getting updated based on the Incident API.	Prerequisites Navigate to Incident > SLA Configuration > Priority Matrix. Select values for the Urgency, Impact, and Priority fields. Click SUBMIT.	Priority field is displayed based on the Priority Matrix in API.

Known Issues

This section describes the known issues detected by the SummitAI Dev and QA team in the release, Denali SP1 HF20.

Issue ID

Issue Description

Scenario

Workaround <if applicable>

87411

The notification e-mail is not triggering for the configured users after the User Selectable approver approves the CR.

This issue occurs only when the User Selectable approver is approving the CR.

Prerequisite

Make sure that a User Selectable approver and followed by notification activity or block are configured in a workflow

NA

89897

The following error message is displayed, while saving Auto Creation settings.

Oops! An error occurred.

Pre-requisites

Configure 30+ Workgroup, Category Classification, Priority, Resolution Code, Closure Code and Configuration Items for a Tenant.

Navigate to Problem > Configuration > Auto Creation Settings. Click Add New. The AUTO CREATION SETTINGS page is displayed. Specify all mandatory fields.
Select all Workgroup, all Category, all Classification, all Priority, all Resolution Code, all Closure Code, and all Configuration Items. Click SUBMIT.

NA

94017

An error message “No output connection available” was displayed when a Change Request-Emergency workflow or any other workflow was edited.

Pre-condition:

Existing Workflow must be configured.

Prerequisites:

1) Log in to the application.

2) Admin > Navigate to Workflow.

3) Select Change Management from Module dropdown.

4) Select STA.Information Technology_EX1_ from Department dropdown.

5) Select ALL from Change Type drop down.

6) Select ALL from Owner group drop down.

7) Select ALL from Category drop down.

8) Click SUBMIT

9) Configured Workflow exists. Select Change Request- Emergency or any workflow.

10) Click SUBMIT

NA

Issue
When the Maker-Checker configuration is enabled for the Allocate action and Maker-Checker approval matrix is configured with two levels of approval, on sending the Allocated Assets for Checker’s approval, the following issues are observed: On the FIXED ASSET page (Asset > User > Manage Asset > Asset Inventory > Click the FIXED icon under the SELECT THE ASSET TYPE section > Click FILTERS on the ACTIONS panel > Select Status as Allocated and provide data in all the other fields > click SUBMIT), duplicate Assets are displayed after the Checker approves the Assets sent for approval. The Assets do not move to the second level of approval after the Assets are approved by the first level of Approver. Prerequisites Enable Maker-checker approval for Asset Allocate transaction. (Admin> Basic > Infrastructure > Tenant > Click Filters on the ACTION panel and select the Domain and click SUMBIT > On the TENANT page under the LIST section, select the Tenant for which you want to enable Maker Checker > Click CONFIGURE DETAILS on the ACTIONS panel > Click Asset Management under the MODULES section > select the check box of Enable Maker-Checker > Select Actions for Maker-Checker to Approve as Allocate > Select the End Time value and click SUBMIT). Configure No. of Approval level as 2 on the APPROVAL MATRIX page (Asset> Configuration > Others > Approval Matrix > On the ACTIONS panel, click ADD NEW > Specify the details > click SUBMIT). Send Assets for approval for Allocate action (Asset > User > Manage Asset > Asset Inventory > On the ASSET INVENTORY page, under the SELECT THE ASSET TYPE section, click FIXED > Select the same Tenant for which the Maker-checker is enabled > Click the In-Store hyperlink of the required Asset Category > Select the check box corresponding to the Asset you want to allocate > On the ACTIONS panel, click ALLOCATE > Specify the mandatory details to allocate the Asset and click SUBMIT). Bug Reproduction Steps: Login to the Application as Checker. Click Asset > User > Manage Asset > Approvals Maker-checker Approval > Click Filters on the ACTIONS panel. On the Filter pop-up page, select the Tenant and specify the required details. Select the Assets that you want to approve and click APPROVE icon on the ACTIONS The APPROVE pop-up page is displayed. On the APPROVE pop-up page, select the Approval Status as Approved to approve the Asset and click Click Asset > User > Manage Asset > Asset Inventory > Click FIXED under the SELECT THE ASSET TYPE section > Click Filters on the ACTIONS On the Filters pop-up page, select the Tenant, Select the Status as Allocated and specify required details. Click SUBMIT. Validate the data. (#72171)
The GetBulletinBoard Mobile API request is used to retrieve Bulletin Board information. The User ID and Tenant Code are passed as the Request Parameters. In the API Response, instead of displaying the Bulletin Board information for the specific User ID and Tenant, the Bulletin Board information for all the Tenants is displayed. (#73031) Prerequisites: Configure Bulletin Boards for multiple Tenants. Bug Reproduction Steps: Log into the Application as an Administrator. Configure a Bulletin Board. For more information, see Configuring Bulletins. Send a POST request for the GetBulletinBoard API. Pass Tenant Code, in the Instance parameter and User ID in the UserID parameter. Check API Response, instead of displaying the Bulletin Board information for the specific User ID and Tenant, the Bulletin Board information for all the Tenants is getting displayed.
On the ACTION DETAILS pop-up page, the Target ID is not showing in the Target column when Status of the Orchestration Workflow Script (other than the first Script) is In-Progress, and it is having Target Host Type mapped to From Previous Output value. However, the Target ID is displayed after the Script is executed successfully. (#73079) Note: This issue is found in Incident Management, Work Order, and Service Request Management (SR) modules. Following bug reproduction steps are for the SR module: Bug Reproduction Steps: Log into the Application as an Administrator. Select Admin > Advanced > Automation > Orchestration. On the WORKFLOW LIST page, click the NEW On the WORKFLOW CONFIGURATION pop-up page, select Module as Service Request, and specify other details to configure the Orchestration Workflow. Map the Target Host Type to From Previous Output value for the scripts of the Orchestration Workflow. Log out and log into the Application as an Administrator or as an Analyst. Select Request > Manage Service Requests > Service Request List. On the SERVICE REQUEST LIST page, specify the Filters and open an SR. On the SERVICE REQUEST DETAILS page, click the ORCHESTRATION tab. On the ORCHESTRATION tab, click the Script When the Script (other than the first Script) is in In Progress status, check the Target column details on the ACTION DETAILS pop-up page. The Target ID is not displaying in the Target column. After successful execution of the Script (other than the first Script), click the Script hyperlink. Check the Target column details on the ACTION DETAILS pop-up page. Now, the Target ID is displaying in the Target column.
The previous Asset transaction details are not displayed under the Previous Transaction drop-down list on the PREVIOUS IMPORT DETAILS page (Asset > User > Manage Assets > Import > Import Asset > Specify all the details > Click SUBMIT), even though the Assets are approved by the Checker on the MAKER-CHECKER ASSET-APPROVAL page (Asset > User > Manage Assets > Approvals > Maker Checker Approval > Click Filters on the ACTIONS panel > Specify the filter criteria to view the list of requests from the Maker > Select the Assets that you want to approve under the LIST section > Click APPROVE on the ACTIONS panel > Select the Approval Status as Approved.) This issue is found when the Asset Maker Checker Configurations is enabled. (#67240)
When a user opens any page in a new tab in the SaaS Environment, the Switch Tenant pop-up is displayed in all the pages. This issue occurs only when the user is using the Firefox private window/tab. (#72276)
On the ADMIN DETAILS page (Admin > Advanced > Password Management > Administrator > Click ADD NEW on the ACTIONS panel > Specify all the details > Click SUBMIT > Select the Domain Name on the LIST page), the Password field is not displaying the GUID or Encrypted ID of the password and the field is empty. This issue is found when the user is logging into the SummitAI application using Microsoft Internet Explorer browser.
On the Incident Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Incident Management > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.
On the Service Request Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Service Request > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and Multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.
The configured Bulletin Board (Admin > Advanced > Notifications > Bulletin Board > Select the Tenant > Click ADD NEW to configure the Bulletin details > Click SUBMIT) is displayed on the END USER DASHBOARD page even if the user does not have access to the selected Tenant and Domain.
Overlapping of content is observed on the Pagination bar of all the pages having high amount of data (typically in the range of 5 digits).
Broken image of the logo is displayed in the application when the logo image is deleted from the APPLICATION SETTINGS page (Admin > Basic > Infrastructure > Application Settings). Workaround: The users need to re-login to the SummitAI application after deleting the logo.
On the AUTO-RESOLUTION SERVICE REQUEST CONFIGURATION and AUTO-RESOLUTION INCIDENT CONFIGURATION page (Admin > Basic > Infrastructure > Tenant > Select Domain > Select Tenant which is configured with Service Request/ Incident Management module > Click CONFIGURE DETAILS on the ACTIONS panel > Under the For End Users tab, select a reason form the Enable Reminder to Callers for Pending Reasons drop-down list > Enable Auto-Resolve Service Requests/ Auto-Resolve Incidents check box > Click Set Fields for Auto-Resolving Service Requests/ Set Fields for Auto-Resolving Incidents link), the users can set the auto-resolution criteria by specifying only white space (not numbers and alphabets) in the Response SLA Reason, Resolution SLA Reason, and Solution fields.
The following issues are observed in BI Custom Reports: When a user downloads the report (in any format), the data is displayed with hyperlinks. When a user places the mouse cursor on the count link, the tooltip is displayed as [Object Object]. In the exported report, report name is displayed with '+' instead of space.
The Change Record is not created when the CR Requester and Customer Approver are same. This issue occurs even though Do Not allow Customer Approval of CR check box is selected on the Change Management TENANT configuration page. This issue occurs only for the first time when the Tenant is configured. Workaround: The Administrator needs to unselect and again select the Do Not allow Customer Approval of CR on the Change Management TENANT configuration page (Admin > Basic > Infrastructure > Tenant > Select the respective Tenant for which this issue is occurring > Click CONFIGURE DETAILS on the ACTIONS panel > Enable Do Not allow Customer Approval of CR check box and click SUBMIT > Clear Do Not allow Customer Approval of CR check box and then click SUBMIT, again).
The new SLA Value of an Incident is not displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident) when an incident is moved from New status to In-Progress using Notification Services.
The Pending Reason of an incident is still displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident), when an Orchestration Script fails and the respective Incident is moved back from Pending to In-Progress.
The notification e-mails related to escalation and jobs are triggered only in English language irrespective of the configured language on the NOTIFICATION TEMPLATE page for all the modules (Admin> Advanced> Notification> Notification Template> Select a Tenant > Click ADD NEW > Specify all the required fields > Click SUBMIT).

Loading