Configuring Dynamic Endpoint

You can configure Dynamic Endpoint for the Endpoint Profile.

To configure Dynamic Endpoint:

  1. You can configure a Dynamic Endpoint in either ways:
    1. Select Asset > Configuration > Endpoint > ProfileList > ADD NEW > Dynamic tab > DYNAMIC CONFIGURATION.
    2. Select Asset > Configuration > Endpoint > ProfileList > DYNAMIC LIST > ADD NEW.

  2. The DYNAMIC CONFIGURATION page is displayed.

    DYNAMIC CONFIGURATION page
    Figure: DYNAMIC CONFIGURATION page

  3. Select the Type from the drop-down list, under which you want to add the Dynamic Endpoints. Based on the Type that you select in the DYNAMIC CONFIGURATION page, the subsequent fields are displayed. You can select the following Types:

     Registry


    Figure: DYNAMIC CONFIGURATION page: Registry type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    Key Path(32 bit)

    Type the 32 bit key path for the Dynamic Endpoint.

    Key Path(64 bit)

    Type the 64 bit key path for the Dynamic Endpoint.

    Key

    Type the key for the Dynamic Endpoint. If the Key value is not mentioned for the Key, type the Key path value.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
     WMI Type


    Figure: DYNAMIC CONFIGURATION page: WMI type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    Namespace

    Select the Namespace from the list. If Other is selected from the list, the Other field is displayed. Specify the Namespace in the Other text box.

    Query

    Type the Query in the text box.

    Key Column

    Specify the Key Column in the text box.

    Value Column

    Specify the value for the key in the text box.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
     CMD


    Figure: DYNAMIC CONFIGURATION page: CMD type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    Command

    Type the Command for the Dynamic Endpoint. Click the Pop Out icon to open the Command field in the COMMAND pop-up page. You can also upload a file using the Upload File icon.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
     PowerShell


    Figure: DYNAMIC CONFIGURATION page: PowerShell type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    Command

    Type the Command for the Dynamic Endpoint. Click the Pop Out icon to open the Command field in the COMMAND pop-up page. You can also upload a file using the Upload File icon.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
     VBScript


    Figure: DYNAMIC CONFIGURATION page: VBScript type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    Command

    Type the Command for the Dynamic Endpoint. Click the Pop Out icon to open the Command field in the COMMAND pop-up page. You can also upload a file using the Upload File icon.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
     File


    Figure: DYNAMIC CONFIGURATION page: File type

    The following table describes the fields on the DYNAMIC CONFIGURATION page:

    Field

    Description

    Type

    Select the Type from the list, under which you want to add the Dynamic Endpoint.

    Display Name

    Type the Dynamic Endpoint security check name.

    File or Folder

    Type a File name for the Dynamic Endpoint.

    Data Type

    Select the Data Type for the Dynamic Endpoint from the list.

    Compare Operator

    Select the Compare operator from the list.

    Criticality

    Select the Criticality of the Dynamic Endpoint.

    Active

    Indicates the status set for the Dynamic Endpoint.

    • If the check box is selected, the Dynamic Endpoint is active.
    • If the check box is not selected, the Dynamic Endpoint is a inactive.
  4. Click SUBMIT to configure the Dynamic Endpoints.

ACTIONS 

This section explains all the icons displayed on the ACTIONS panel of the DYNAMIC CONFIGURATION page.

 SHOW LIST

Click SHOW LIST to display the LIST table showing all the configured Dynamic Endpoints. For more information, see Viewing Dynamic Endpoint List.