Viewing Overall Risks

Owned by Chilukuri Srinivasa Reddy (Unlicensed)
Last updated: Apr 22, 2024 by Shilpa K (Deactivated)Version comment

You can view the overall risk for a selected Tenant and device type in the OVERALL RISK page.

To view Overall Risk:

  1. Select Operations > User > Risks > Overall Risk.
  2. On the OVERALL RISK page, click the Filters icon and select the Tenant and Device Type.
  3. Click SUBMIT. List of all the devices with their respective risk values are displayed, for the selected Tenant and device type. For more information about fields on the OVERALL RISK page, see Field Description.

    OVERALL RISK page
    Figure: OVERALL RISK page

Field Description

The following table describes the fields on the OVERALL RISK page. The fields on the OVERALL RISK page will vary based on the selected Device Type. 

Field

Description

Host Name

Displays the Host Name of the Network Device or Server. If the device type is a Network Link, instead of Host Name, Link Name column is displayed.

IP Address

Displays the IP Address of the Network Device/Server. This column is not displayed if the selected device type is Network Link. Instead, two additional columns, Source IP and Dest IP are displayed, which display the source and destination IP addresses for the Network Link.

Device Type

Displays the type of device.

<Risk Name>

Displays the risk value for the device in the event of the risk.
Note: The <Risk Name> column is configurable and there can be multiple Risk name columns based on the configurations done in the CONFIGURING RISK page. For details on configuring risks, see Configuring Risk.

Overall

Displays the overall risk value of the device.