On the NETWORK DEVICE DETAILS pop-up page, you can view the selected Network Device details, such as Status, Current Availability & Latency, Utilization, Environmental Parameters, Interfaces, and so on.
To view Network Device Details :
- Select Operations > User > Views > Network View.
- On the NETWORK VIEW page, select the Tenant to view the Views created for the selected Tenant.
- A list of configured Views are displayed. Click the View name that you want to view.
- On the Drawing Board, click the Network Device to view the details. For more information about the fields on the NETWORK DEVICE DETAILS pop-up page, see Field Description.
Figure: NETWORK DEVICE DETAILS pop up page
Field Description
This section describes the fields on the NETWORK DEVICE DETAILS pop-up page.
Under the DETAILS tab, you can view the status, current availability and latency of the selected device.
Figure: DETAILS tab
The following table describes the fields under the DETAILS tab:
Field | Description |
|---|---|
Status | This section displays the Host name, IP address, status, device type, and the top 5 downtime details of the device. |
Current Availability & Latency | Displays the latency report and network availability report of the Network Devices for the current day. You can mouse over to view the Current Availability. Click the Current Availability graph to view the Network Uptime pop-up page. |
DETAILS | Displays the Network Device details. |
Network Device ID | Displays the Network Device Identification Number. |
Description | Displays the description provided for the Network Device. |
Host Name | Displays the Host name of the Network Device. |
IP Address | Displays the IP address of the Network Device. |
Tenant | Displays the Tenant of the Network Device. |
Location | Displays the Location of the Network Device. |
IOS | Displays the IOS of the Network Device. |
Vendor | Displays the Vendor name for the Network Device. |
Customer | Displays the name of the Customer for the Network Device. |
Criticality | Displays the criticality of the Network Device. |
Mail To | Displays the e-mail ids of the recipients to send the Alert/Notification e-mails |
Mail CC | Displays the configured e-mail ids of the recipients to whom the Alert/Notification e-mails about the device status need to be sent in “CC” list. |
Service Entitlement | Displays the configured Service Entitlement. |
Serial Number | Displays the Serial Number of the Network Device. |
Monitoring Source | Displays the Monitoring Source of the Network Device. |
SNMP Version | Displays the SNMP version of the Network Device. |
Under the CPU Utilization tab, you can view the percentage of CPU and Memory usage of the Network Device. The percentage of CPU usage is represented as a graph in different color codes. You can view the CPU utilization graph for current day, last 7 days, last month, and last six months.
- If the CPU usage is above the specified Threshold value, the color code of the graph is displayed as red.
- If the CPU usage is almost nearing to the specified Threshold value, the color code of the graph is displayed as yellow.
- If the CPU usage is maintained within the specified Threshold value, the color code of the graph is displayed as green.
Similarly, you can also view the Memory Utilization of the Network Device in the Memory Utilization section. Memory utilization graph is represented as graph in different color codes.
You can also view the Event Trends graph of the CPU utilization for the current day, week, a month, and six months.
You can configure the Threshold value for the Network Device parameter in the THRESHOLD CONFIGURATION section.
Figure: CPU Utilization tab
The following table describes the fields under the CONFIGURE THRESHOLD PARAMETER section:
Note:
You can configure threshold parameters only if Edit rights are provided in Role Template. The SUBMIT button is displayed only if you have Edit rights. For details on Role Template, see SUMMITAI General.
Field | Description |
|---|---|
Parameter | Displays the configured Threshold parameters as CPU and Memory. Click the CPU link to view the summary of CPU Utilization details of the current day. Click the Memory link to view the Memory Utilization details of the current day. |
Utilization | Displays the Utilization percentage of the parameter. |
Threshold High(%) | Type in the High Threshold Value for the parameter. |
Threshold Medium (%) | Type in the Medium Threshold Value for the parameter. |
Threshold Low(%) | Type in the Low Threshold value for the parameter. |
Under the ENVIRONMENTAL PARAMETER tab, you can monitor device's environmental parameters, such as temperature, fan, and voltage status. You can configure Threshold conditions and Threshold values for the environmental parameters.
Figure: ENVIRONMENTAL PARAMETERS tab
The following table describes the fields under the ENVIRONMENTAL PARAMETER tab:
Note:
You can configure environmental parameters only if Edit rights are provided in Role Template. The SUBMIT button is displayed only if you have Edit rights. For details on Role Template, see SUMMITAI General.
Fields | Information |
|---|---|
Parameters | Displays the configured environmental parameter values: Temperature Status, Fan Status, and Voltage Status |
Current Status | Displays the current status of the corresponding environmental parameter. |
Threshold Condition | Specify the condition for the Threshold value. |
Threshold | Specify the Threshold value. |
Under the LINKS tab, you can view the list of associated Links for the Network Device. You can view the Link details, such as link name, Link Capacity, Source IP Address, Destination IP Address, Status, and so on.
Figure : Links tab
The following table describes the fields under the LINKS tab:
Fields | Description |
|---|---|
Link Name | Displays the Link name. Click the hyperlink to view the Link details. For more information about Link details, see Viewing Network Link Details_AVM. |
Link Capacity | Displays the Link Capacity. |
Source IP Address | Displays the IP address of the Source. |
Destination IP Address | Displays the IP address of the Destination. |
Status | Displays the status of the Link. |
Utilization (In) | Displays the Link Data Utilization Inflow in kilobytes. |
Utilization (Out) | Displays the Link Data Utilization Outflow in kilobytes. |
Collision Error | Displays the number of Collisions occurred during data transfer. |
CRC Error | Displays the number of CRC errors occurred during data transfer. |
Input Error | Displays the number of Input Errors occurred during data transfer. |
Output Error | Displays the number of Output Errors occurred during data transfer. |
Under the INTERFACES tab, you can view the monitored Interface details. You can configure the Interfaces for monitoring and to view the Interface information of a device, such as type, speed, MAC address, admin and operational status, Interface IP address, remote host name, alias, connectivity, and so on.
Figure: INTERFACES tab
The following table describes the fields under the INTERFACES tab:
Fields | Information |
|---|---|
Monitor |
|
Interface | Displays the Interface name. Click the hyperlink to view the Interface details, see Viewing Network Link Details_AVM. The hyperlink is displayed only for monitored Interfaces. |
Name | Displays the name of the Interface. |
Interface IP | Displays the IP address of an Interface. |
Status | Displays the status of the Network Device Interface.
|
Status | Displays the status of the Network Device Interface.
|
Utilization (in) | Displays the Link Data Utilization Inflow in kilobytes. |
Utilization (out) | Displays the Link Data Utilization Outflow in kilobytes. |
Remote Host | Displays the Remote Host address of the Interface. |
MAC Address | Displays the MAC address of the Interface. |
Capacity | Displays the Capacity of the Interface |
Ifindex | Displays the IFindex value. |
Type | Displays the type of the Interface. |
Alias | Displays the alias name provided to the Interface. |
Is Connectivity | Displays the status of the Interface.
|
Link or Interface Type | Displays if the device is a Link or an Interface. |
Internet Protocol Service Level Agreement (IPSLA) allows to measure the performance of the network and quickly identify the loss of data. Under the IPSLA tab, the response time, jitters, latency,packet loss and voice score are represented as a graph. Protocols, such as UDP, ICMP, PATH JITTERS are configured to gather information about the Network Devices. You can view the minimum, maximum and average values for round time trip(RTT), and latency. You can view the minimum positive, maximum positive , minimum negative, maximum negative, average positive, and average positive values for path jitter. You can configure Threshold levels for parameters of UDP, Path Jitter, and ICMP. We can configure to monitor these parameters and take action if the parameter exceeds the Threshold values.
Figure: IPSLA tab
Figure: Network Latency Tab
Under the SNMP Traps tab, you can monitor the Trap time, Trap OID value and the Trap Messages of the selected Network Device that is configured with the SNMP Trap rules. You can search the SNMP Trap data for the selected range of time.
Figure: SNMP Traps tab
The following table describes the fields under the SNMP TRAPS tab:
Field | Description |
|---|---|
Trap Time | Displays the received time of the trap. |
Trap OID value | Displays the OID value of the trap. |
Trap Description | Descries about the trap message received from the Network Devices/Servers. |
Under the RELATIONSHIP tab, you can to view the associated Incidents, Service Requests, Change Records, CIs, Problem Records, and Knowledge Records for the selected Network Device.
Figure: RELATIONSHIP tab
Under the EVENT LIST tab, you can view the list of Events logged for the Network Interface. You can filter the Event list based on the selected Event Status and Category. You can view Critical, Warning, Alert, and Information Events.
Figure: EVENT LIST tab
The following table describes the fields under the EVENT LIST tab:
Field | Description |
|---|---|
FILTERS | |
Event Status | Lists the Event status. Select an Event status to filter and display the Event list. |
Category | Lists the categories. Select a category to filter and display the Event list. |
EVENT LIST | |
Critical | You can view the list of Critical Events logged for the Interface. |
Warning | You can view the list of Warning Events logged for the Interface. |
Alert | You can view the list of Alert Events logged for the Interface. |
Information | You can view the list of Information Events logged for the Interface. |
Serial Number | Displays the serial number. |
Event ID | Displays the Event Identification Number. Click the hyperlink to view the Event details. For more information about the fields on Event ID pop-up page, see Event List Report__AVM. |
Category | Displays the category of the Event. |
Status | Displays the status of the Event. |
Message | Displays the message configured for the device. |
SOP icon | The |
Error | Displays the occurred error in the device. |
Acknowledged | Displays the Event acknowledged status. |
Created Date | Displays the date the Event was created. |
Incident ID | Displays the Incident ID for the Event. Click the hyperlink to view the Incident details. |
