Probable Timeline of Detection

Owned by Chilukuri Srinivasa Reddy (Unlicensed)
Last updated: Apr 22, 2024 by Shilpa K (Deactivated)Version comment

You can configure the probability of detection of a risk for a selected Tenant and device type.

To configure probability of detection:

  1. Select Operations> User > Risks > Probable Timeline of Detection.
  2. On the PROBABLE TIMELINE OF DETECTION page, click the Filters icon and select the Tenant and Device Type. Click SUBMIT. List of all the configured devices for the selected Tenant and device type is displayed.

  3. In the <Risk Name> column, select the Probability of Detection value for each device in the event of the risk. For more information about fields on the PROBABLE TIMELINE OF DETECTION page, see Field Description.

    Note:

    The <Risk Name> column is configurable and there can be multiple Risk name columns based on the configurations done in the CONFIGURING RISK page. For details on configuring risks, see Configuring Risk.

  4. Click SUBMIT. The Probable Timeline of Detection is configured.

    PROBABLE TIMELINE OF DETECTION page
    Figure: PROBABLE TIMELINE OF DETECTION page

Field Description

The following table describes the fields on the PROBABLE TIMELINE OF DETECTION page. The fields on the PROBABLE TIMELINE OF DETECTION page will vary based on the selected Device Type.

Field

Description

Host Name

Displays the Host Name of the Network Device or Server. If the device type is a Network Link, instead of Host Name, Link Name column is displayed.

IP Address

Displays the IP Address of the Network Device/Server. This column is not displayed if the selected device type is Network Link. Instead, two additional columns, Source IP and Dest IP are displayed, which display the source and destination IP addresses for the Network Link.

Device Type

Displays the type of device.

<Risk Name>

Select the Probability of Detection value for the device in the event of the risk.