Configuring Correction Capability

Owned by Chilukuri Srinivasa Reddy
Last updated: Apr 22, 2024 by Shilpa K (Deactivated)Version comment
2 min read

You can configure the correction capability of a device in the event of a risk.

To configure correction capability:

  1. Select Operations> User > Risks > Correction Capability.
  2. On the CORRECTION CAPABILITY page, click the Filters icon and select the Tenant and Device Type. Click SUBMIT. List of all the configured assets for the selected Tenant and device type is displayed.

  3. In the <Risk Name> column, select the Correction Capability value for each asset in the event of the risk. For more information about fields on the CORRECTION CAPABILITY page, see Field Description.

    Note:

    The <Risk Name> column is configurable and there can be multiple Risk name columns based on the configurations done in the CONFIGURING RISK page. For details on configuring risks, see Configuring Risk.

  4. Click SUBMIT. The Correction Capability is configured.

    CORRECTION CAPABILITY page
    Figure:  CORRECTION CAPABILITY page

Field Description

The following table describes the fields on the CORRECTION CAPABILITY page. The fields vary based on the selected Device Type.

Field

Description

Host Name

Displays the Host Name of the Network Device or Server. If the device type is a Network Link, instead of Host Name, Link Name column is displayed.

IP Address

Displays the IP Address of the Network Device/Server. This column is not displayed if the selected device type is Network Link. Instead, two additional columns, Source IP and Dest IP are displayed, which display the source and destination IP addresses for the Network Link.

Device Type

Displays the type of device.

<Risk Name>

Select the Correction Capability value for the device in the event of the risk.