Probability of Occurrence

Owned by Chilukuri Srinivasa Reddy
Last updated: Apr 23, 2024 by Mayuresh Balaji Kamble (Unlicensed)Version comment
2 min read

You can configure the probability of occurrence of a risk for a selected Tenant and device type.

To configure probability of occurrence:

  1. Select Operations > User > Risks > Probability of Occurrence.
  2. On the PROBABILITY OF OCCURRENCE page, click the Filters icon and select the Tenant and Device Type. Click SUBMIT. List of all the configured devices for the selected Tenant and device type is displayed.

  3. In the <Risk Name> column, select the Probability of Occurrence value for each device in the event of the risk. For more information about fields on the PROBABILITY OF OCCURRENCE page, see Field Description.

    Note:

    The <Risk Name> column is configurable and there can be multiple Risk name columns based on the configurations done in the CONFIGURING RISK page. For details on configuring risks, see Configuring Risk.

  4. Click SUBMIT. The Probability of Occurrence is configured.

    PROBABILITY OF OCCURRENCE page
    Figure:  PROBABILITY OF OCCURRENCE page

Field Description

The following table describes the fields on the PROBABILITY OF OCCURRENCE page. The fields on the PROBABILITY OF OCCURRENCE page will vary based on the selected Device Type.

Field

Description

Host Name

Displays the Host Name of the Network Device or Server. If the device type is a Network Link, instead of Host Name, Link Name column is displayed.

IP Address

Displays the IP Address of the Network Device/Server. This column is not displayed if the selected device type is Network Link. Instead, two additional columns, Source IP and Dest IP are displayed, which display the source and destination IP addresses for the Network Link.

Device Type

Displays the type of device.

<Risk Name>

Select the Probability of Occurrence value for the device in the event of the risk.