Page Comparison

The Auto Escalation feature automatically triggers escalation e-mails to the configured users if there is no response to the ticket within a specified time. You can configure Auto Escalation for Incident, Service Request, CMDB, Knowledge, Problem, and Change Management modules.

To configure Auto Escalation:

Select Admin > Advanced > Productivity > Escalations > Auto Escalations.
On the AUTO ESCALATIONS page, click ADD NEW icon on the ACTIONS panel.
Select the Tenant and specify all the required details on the AUTO ESCALATIONS page. For more information about the fields on the AUTO ESCALATIONS page for a selected module, see Configuration section below.
Click SUBMIT. A new Auto Escalation is configured for the selected module under the selected Tenant.

AnchorConfigurationConfigurationConfiguration Expand

title	Configuring Auto Escalation for Incident Management

AUTO ESCALATIONS page: Incident Field Description Image Removed
Figure: AUTO ESCALATIONS page: Incident

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Incident Management module.

Field

Description

DETAILS

Modules

Select the module as Incident from the drop-down list.

Workgroup Name

Select the Workgroup name from the drop-down list for which you want to configure Auto Escalation.

Location

Select the Location from the drop-down list for which you want to configure Auto Escalation.

Customer

Select the Customer from the drop-down list. The Auto Escalation feature is enabled for the selected customer only.

Priority

Select the Priority from the list. The Auto Escalation configuration is applicable for the Incidents under the selected Priority.

Escalation Mode

Select and Escalation mode from the drop-down list (By Time or By SLA%)

Select By Time to send the Escalation e-mail if there is no response to the Incident within the specified time.
Select By SLA% to send Escalation e-mail if there is no response to the Incident with in the specified percentage of time defined in SLA.

Based on the option selected, the fields are displayed under the RESOLUTION LEVELS table.
See, Configuring Auto Escalation for Incident By Time.
See, Configuring Auto Escalation for Incident By SLA.

Escalation Levels for Resolution Time SLA

Select the number of escalation levels for the Resolution Time SLA. Depending on the number of levels, ESCALATION LEVELS FOR RESOLUTION TIME SLA configuration tables are added to configure Auto Escalation for the Incidents, which are not Resolved within the specified time.
Select more than one level to send Escalation e-mail to the configured users after every specified duration.

Escalation Levels for Response Time SLA

Select the number of escalation levels for the Response

Expand

title	Others

Tenant Department Customer

Configuring Auto Escalation for Incident By SLA

Configuring Auto Escalation for Incident By Time

Configuring Auto Escalation for SR by Time

Configuring Auto Escalation for SR by SLA

Configuring Mailbox

Proxy View

Configuring Vendor MIBs

Summit Audit Log for Login Accounts

Scripting

Scroll export button

scope	current
template-id	c9a14909-8f27-452d-bca0-164bee1a9265
caption	Download this Page
add-on	Scroll PDF Exporter

The Auto Escalation feature automatically triggers escalation e-mails to the configured users if there is no response to the ticket within a specified time. You can configure Auto Escalation for Incident, Service Request, CMDB, Knowledge, Problem, and Change Management modules.

To configure Auto Escalation:

Select Admin > Advanced > Productivity > Escalations > Auto Escalations.
On the AUTO ESCALATIONS page, click ADD NEW icon on the ACTIONS panel.
Select the Tenant and specify all the required details on the AUTO ESCALATIONS page. For more information about the fields on the AUTO ESCALATIONS page for a selected module, see Configuration section below.
Click SUBMIT. A new Auto Escalation is configured for the selected module under the selected Tenant.

Anchor

	Configuration
	Configuration

Configuration

Expand

title	Configuring Auto Escalation for Incident Management

AUTO ESCALATIONS page: Incident Field Description Image Added
Figure: AUTO ESCALATIONS page: Incident

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Incident Management module.

Field	Description
DETAILS
Modules	Select the module as Incident from the drop-down list.
Workgroup Name	Select the Workgroup name from the drop-down list for which you want to configure Auto Escalation.
Location	Select the Location from the drop-down list for which you want to configure Auto Escalation.
Customer	Select the Customer from the drop-down list. The Auto Escalation feature is enabled for the selected customer only.
Priority	Select the Priority from the list. The Auto Escalation configuration is applicable for the Incidents under the selected Priority.
Escalation Mode	Select and Escalation mode from the drop-down list (By Time or By SLA%) Select By Time to send the Escalation e-mail if there is no response to the Incident within the specified time. Select By SLA% to send Escalation e-mail if there is no response to the Incident with in the specified percentage of time defined in SLA. Based on the option selected, the fields are displayed under the RESOLUTION LEVELS table. See, Configuring Auto Escalation for Incident By Time. See, Configuring Auto Escalation for Incident By SLA.
Escalation Levels for Resolution Time SLA	Select the number of escalation levels for the Resolution Time SLA. Depending on the number of levels, ESCALATION LEVELS FOR RESPONSE RESOLUTION TIME SLA configuration tables are added to configure Auto Escalation for the Incidents, which are not responded Resolved within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for Pending StatusResponse Time SLA	Select the number of escalation levels for the Pending statusResponse Time SLA. Depending on the number of levels, ESCALATION LEVELS FOR PENDING STATUS RESPONSE TIME SLA configuration tables are added to configure Auto Escalation for the Pending Incidents, which are not responded within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for Number of ReassignmentsPending Status	Select the number of escalation levels for the Number of Reassignments of the IncidentPending status. Depending on the number of levels, ESCALATION LEVELS FOR NUMBER OF REASSIGNMENTS PENDING STATUS configuration tables are added to configure Auto Escalation for the Pending Incidents, which are reassigned for not responded within the specified number of timestime. Select more than one level to send Escalation e-mail to the configured users after every specified number of Reassignmentsduration.
Escalation Levels for ETRNumber of Reassignments	Select the number of escalation levels for ETRthe Number of Reassignments of the Incident. Depending on the number of levels, ESCALATION LEVELS FOR ETR NUMBER OF REASSIGNMENTS configuration tables are added to configure Auto Escalation for the Incidents, which are not resolved within the expected resolution timereassigned for the specified number of times. Select more than one level to send Escalation e-mail to the configured users after every specified durationnumber of Reassignments.
Active	If selected, the Auto Escalation configuration becomes active and the Escalation e-mail is sent to configured users Escalation Levels for ETR	Select the number of escalation levels for ETR. Depending on the number of levels, ESCALATION LEVELS FOR ETR configuration tables are added to configure Auto Escalation for the Incidents, which are not resolved within the expected resolution time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Active	If selected, the Auto Escalation configuration becomes active and the Escalation e-mail is sent to configured users if the Incident is not responded or resolved within the specified time.

Expand

title	Configuring Auto Escalation for Service Request

AUTO ESCALATIONS page: Service Request
Figure: AUTO ESCALATIONS page: Service Request

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Service Request.

Field	Description
DETAILS
Modules	Select the module as Service Request from the list.
Workgroup Name	Select the Workgroup name from the list for which you want to configure Auto Escalation.
Location	Select the Location from the drop-down list for which you want to configure Auto Escalation.
Customer	Select the Customer from the drop-down list. The Auto Escalation feature is enabled for the selected customer only.
Priority	Select the Priority from the list. The Auto Escalation is configured for the Incidents of the selected Priority.
Escalation Mode	Select and Escalation mode from the drop-down list (By Time or By SLA%). Select By Time to send the Escalation e-mail if the ticket is not responded or Resolved within the specified time. Select By SLA% to send Escalation e-mail if the ticket is not responded or Resolved within the specified percentage of time defined in SLA. Based on the option selected, the fields are displayed under the RESOLUTION LEVELS table. See, Configuring Auto Escalation for SR by Time. See, Configuring Auto Escalation for SR by SLA.
Escalation Levels for Resolution Time SLA	Select the number of escalation levels for the Resolution Time SLA. Depending on the number of levels, ESCALATION LEVELS FOR RESOLUTION TIME SLA configuration tables are added to configure Auto Escalation for the SRs, which are not Resolved within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for Response Time SLA	Select the number of escalation levels for the Response Time SLA. Depending on the number of levels, ESCALATION LEVELS FOR RESPONSE TIME SLA configuration tables are added to configure Auto Escalation for the SRs, which are not responded within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for Pending Status	Select the number of escalation levels for the Pending status. Depending on the number of levels, ESCALATION LEVELS FOR PENDING STATUS configuration tables are added to Auto Escalation for the Pending SRs, which are not responded within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for Number of Reassignments	Select the number of escalation levels for the Number of Reassignments of the SR. Depending on the number of levels, ESCALATION LEVELS FOR PENDING STATUS configuration tables are added to configure Auto Escalation for the SRs, which are reassigned for the specified number of times. Select more than one level to send Escalation e-mail to the configured users after every specified number of Reassignments.
Escalation Levels for Approval	Select the number of escalation levels for approval from the drop-down list. Depending on the number of levels, ESCALATION LEVELS FOR APPROVAL configuration tables are added to configure Auto Escalation for the SRs, which are not approved within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Active	If selected, the Auto Escalation configuration becomes active and Escalation mail is sent to the configured users if the SR is not responded or resolved within the specified time.

Expand

title	Configuring Auto Escalation for CMDB

AUTO ESCALATIONS page: CMDB
Figure: AUTO ESCALATIONS page: CMDB

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for CMDB module.

Field	Description
DETAILS
Modules	Select the module as CMDB from the list.
Workgroup Name	Select the Workgroup name from the list.
Escalation Levels	Select the number of escalation levels. Based on the number selected, the fields are displayed under the ESCALATION LEVELS table. You add can multiple level of escalation.
Active	If selected, the Auto Escalation configuration for CMDB module becomes active and Escalation mail is sent to the configured users if there is no response to the Configuration Items within the specified time.
ESCALATION LEVELS
Level	Displays the escalation levels for the CMDB module.
Days	Select the number of days after which the auto escalation happens if there is no response to the Configuration Items within the specified days.
Hours	Select the number of hours after which the auto escalation happens if there is no response to the Configuration Items within the specified hours.
Minute(s)	Select the number of minutes after which the auto escalation happens if there is no response to the Configuration Items within the specified minute(s).
Description	Type in the brief description for the Escalation.
Mail To	Type in the recipients' e-mail ids to send escalation e-mail. You can separate multiple e-mail ids with semicolons (;).
Mail CC	Type in the recipients' e-mail ids in CC to send copy escalation e-mail. You can separate multiple e-mail ids with semicolons (;).

Expand

title	Configuring Auto Escalation for Knowledge Management

AUTO ESCALATIONS page: Knowledge Management
Figure: AUTO ESCALATIONS page: Knowledge Management

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Knowledge Management.

Field	Description
DETAILS
Modules	Select the module as Knowledge Management from the list.
Category	Select Category for the drop-down list.
Classification	Select Classification for the drop-down list.
Escalation Level	Select the number of escalation levels. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Active	If selected, the Auto Escalation configuration for Knowledge Management module becomes active and Escalation mail is sent to the configured users if there is no response to the Knowledge Record within the specified time.
ESCALATION LEVEL
Level	Displays the escalation levels for Knowledge Record.
Days	Select the number of days after which the auto escalation happens.
Hours	Select the number of hours after which the auto escalation happens.
Minute(s)	Select the number of minutes after which the auto escalation happens.
Description	Type in the brief description for the Escalation.
Mail To	Type in the recipients' e-mail ids to send escalation e-mail. You can separate multiple e-mail ids with semicolons (;).
Mail CC	Type in the recipients' e-mail ids in CC to send copy escalation e-mail. You can separate multiple e-mail ids with semicolons (;).

Expand

title	Configuring Auto Escalation for Problem Management

AUTO ESCALATIONS page: Problem Management
Figure: AUTO ESCALATIONS page: Problem Management

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Problem Management.

Field	Description
DETAILS
Modules	Select the module as Problem Management from the list.
Workgroup Name	Select the Workgroup name from the list. The Auto Escalation configuration is applicable for PRs under the selected Workgroup.
Priority	Select the Priority from the list. The Auto Escalation configuration is applicable for PRs under the selected Priority.
Escalation Levels for Approval	Select the number of escalation levels for the Approval of Problem Record. Depending on the number of levels, APPROVAL ESCALATION LEVELS configuration tables are added to configure Auto Escalation for the PRs, which are not Approved within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels for RCA Deadline	Select the number of escalation levels for the RCA Approval of Problem Record. Depending on the number of levels, RCA DEADLINE ESCALATION LEVELS configuration tables are added to configure Auto Escalation for the PRs, which are not RCA Approved within the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Escalation Levels Closure Deadline	Select the number of escalation levels for the Closure of Problem Record. Depending on the number of levels, CLOSURE DEADLINE ESCALATION LEVELS configuration tables are added to configure Auto Escalation for the PRs, which are not Closed after the specified time. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Active	If selected, Auto Escalation configuration for the Problem Management module becomes active and the Escalation e-mail is sent to the configured users if the Problem Record is responded after the specified time.
APPROVALS ESCALATION LEVELS
Level	Displays the escalation levels for PR Approval.
Days	Select the number of days after which the auto escalation happens.
Hours	Select the number of hours after which the auto escalation happens.
Minutes	Select the number of minutes after which the auto escalation happens.
Mails	Type in the e-mail ids of the recipients to whom you want to send e-mails, intimating the escalation. You can separate multiple e-mail ids with semicolons (;).
RCA DEADLINE ESCALATION LEVELS
Level	Displays the escalation levels for PR RCA Approval.
Type	Select the check boxes against the recipients to whom e-mails are sent intimating the escalation. Based on the selection of the check boxes, the E-mail, Analyst, and Workgroup fields are displayed.
Days	Select the number of days after which the auto escalation happens.
Hours	Select the number of hours after which the auto escalation happens.
Minutes	Select the number of minutes after which the auto escalation happens.
Mails	Type in the e-mail ids of the recipients to whom you want to send e-mails, intimating the escalation. You can separate multiple e-mail ids with semicolons (;).
CLOSURE DEADLINE ESCALATION LEVELS
Level	Displays the escalation levels for Closing the PR.
Type	Select the check boxes against the recipients to whom e-mails are sent intimating the escalation. Based on the selection of the check boxes, the E-mail, Analyst, and Workgroup fields are displayed.
Days	Select the number of days after which the auto-escalation happens.
Hours	Select the number of hours after which the auto-escalation happens.
Minutes	Select the number of minutes after which the auto-escalation happens.
Mails	Type in the e-mail ids of the recipients to whom you want to send e-mails, intimating the escalation. You can separate multiple e-mail ids with semicolons (;).

Expand

title	Configuring Auto Escalation for Change Management

AUTO ESCALATIONS page: Change Management
Figure: AUTO ESCALATIONS page: Change Management

Field Description

The following table describes the fields on the AUTO ESCALATIONS page for Change Management module.

Field	Description
DETAILS
Modules	Select the module as Change Management from the list.
Workgroup Name	Select the Workgroup name from the list. The Auto Escalation configuration is applicable for the Change Records under the selected Workgroup.
Priority	Select the Priority from the list. The Auto Escalation configuration is applicable for the Change Records under the selected Priority.
Change Type	Select the Change Type from the drop-down list. The Auto Escalation configuration is applicable for the Change Records under the selected Change Type.
Escalation Level	Select the number of escalation levels. Select more than one level to send Escalation e-mail to the configured users after every specified duration.
Active	If selected, the Auto Escalation configuration becomes active for the Change Management module and the Escalation mail is sent to the configured users after the specified time if the Change Record is not Responded.
ESCALATION LEVEL
Level	Displays the escalation levels for Change Management module.
Days	Select the number of days after which the auto escalation happens.
Hours	Select the number of hours after which the auto escalation happens.
Minute(s)	Select the number of minutes after which the auto escalation happens.
Description	Type in the brief description for the Escalation.
Mail To	Type in the recipients' e-mail ids to send escalation e-mail. You can separate multiple e-mail ids with semicolons (;).
Mail CC	Type in the recipients' e-mail ids in CC to send copy escalation e-mail. You can separate multiple e-mail ids with semicolons (;).

ACTIONS

This section explains all the icons displayed on the ACTIONS panel of the AUTO ESCALATIONS page.

SHOW LIST

Click SHOW LIST to display the LIST table showing all the Auto Escalations configured for the selected Module and Tenant. Click the Filters icon to select the module for which you want to view the configured Auto Escalations.

AUTO ESCALATIONS page: List of Auto Escalations
Figure: AUTO ESCALATIONS page: List of Auto Escalations

To edit an Auto Escalation configuration, click the Workgroup name. Make appropriate changes and click SUBMIT.
To display the inactive Auto Escalations, click the Include Inactive check box.

Note

title	Note:

When the Auto Escalations are displayed under the LIST table, the ADD NEW action are displayed on the ACTIONS panel. Click ADD NEW to configure Auto Escalation.

Filters

Click Filters to display all the Auto Escalations configured for a specific module. On the FILTERS pop-up page, select the module name from the Modules list. Click SUBMIT.

FILTERS pop-up page
Figure: FILTERS pop-up page

truenoneRelease Noteshttp://summitconfluence.symphonysummit.com:8090/display/PD/SUMMIT+Release+Notes

truenoneInstallation Guide http://summitconfluence.symphonysummit.com:8090/display/PD/Installation+Guide

truenoneOther Documents http://summitconfluence.symphonysummit.com:8090/display/PD/Other+Documents

Scroll ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

1

Versions Compared

Old Version 1

New Version Current

Key

To configure Auto Escalation:

To configure Auto Escalation:

ACTIONS

| |