Configuring PIR Reviewer
- Enterprise IT
- Shilpa K (Deactivated)
- Enterprise IT
- Mayuresh Balaji Kamble (Unlicensed)
Who is PIR Reviewer?
This configuration is used to restrict review and closure of CRs to specific set of users based on the Change Type, Category, Workgroup, Change Category. For example, a Normal Change that is Major needs to be reviewed and closed only by the CIO. You can add, modify, or remove PIR Reviewer for a combination (Tenant, Change Type, Category, Workgroup and Change Category). Only the configured PIR Reviewer/s can review and close the Change Record. If not configured for a combination (Tenant, Change Type, Category Workgroup and Change Category), the CAB, Change Manager or Analysts will be able to review and close a CR.
You can add more than one PIR Reviewers and select multiple PIR Reviewers as per your requirement.
To configure PIR Reviewer:
- Click Change > Configuration > PIR Reviewer.
- On the PIR REVIEWER page, click ADD NEW.
- Select the Tenant and fill in all the details on the PIR REVIEWER page. For information about the fields on the PIR REVIEWER page, see Field Description.
- Click SUBMIT. A new PIR Reviewer is configured.
Figure: PIR REVIEWER page
Field Description
The following table describes the fields on the PIR REVIEWER page:
Field | Description |
|---|---|
DETAILS | |
Change Type | Select the Change Type for which you want to configure the PIR Reviewer. |
Category | Select the Category from the drop-down list. |
| Workgroup | Select the workgroup from the drop-down list. Available options are based on the Workgroup configuration done at Admin level (Admin > Infrastructure > Workgroup). |
| Change Category | Select the change category from the drop-down list. Available options are based on the Change Category configuration done at Change module level (Change > Configuration > Change Category). Click Clear hyperlink to remove Change Category configuration on PIR Reviewer Details page. Consider you want to remove the Change Category Hardware as shown in the following screenshot:
|
PIR Reviewer | Type in the name of the person you want to configure as PIR Reviewer for the selected Tenant. You can also click Search icon
Click OK to add the PIR Reviewer name in the list. Note You can add multiple users in the PIR Reviewer list as shown in the following screenshot.
|
Active | If Active check box is selected, the PIR Reviewer configuration for the selected Tenant becomes active. |
If the specified Change Type, Category, Workgroup, Change Category for a record exactly matches with any previous record, then the system displays the following message:
Figure: Validation Message
- Go to Record - Click on Go to Record, the PIR Reviewer Details screen is displayed to edit the record details.
- Cancel - Click Cancel to close the message window without making any changes in the the record.
If a record has Change Type and/or Category as ALL and you attempt to add one more record with Change Type and/or Category as any other value except ALL but Workgroup, Change Category and PIR Reviewer fields has exact match with the same values then it will not throw any validation message. The following example illustrates the same:
Scenario 1 - Generic Configuration
Consider the following configuration with Change Type as ALL, Category as ALL, Workgroup as CMDB Workgroup, Change Category as Hardware and PIR Reviewer as Fredrick Norton.
Figure: PIR Details page - Generic Configuration
Scenario 2 - Specific Configuration
Now, you attempt to add one more record for PIR reviewer configuration with Change Type as Normal, Category as Medium, Workgroup as CMDB Workgroup, Change Category as Hardware and PIR Reviewer as William James.
Figure: PIR Details page - Specific Configuration
In this case, one more reviewer William James is also added as one more record in the PIR Reviewer list without any validation message.
Use Case I- The CR with specific configuration precedes the record with generic configuration. The following example illustrates the same:
Scenario I - Generic Configuration
The following is the sample screenshot of generic configuration for PIR Reviewer with Change Type as ALL, Category as ALL, Workgroup as CMDB Workgroup, Change Category as Hardware and PIR Reviewer as Christian Marnell.
Figure: PIR Details page - Generic Configuration
Scenario II - Specific Configuration
The following is the sample screenshot of specific configuration for PIR Reviewer with Change Type as Normal, Category as Medium, Workgroup as CMDB Workgroup, Change Category as Hardware and PIR Reviewer as Fredrick Norton.
Figure: Figure: PIR Details page - Specific Configuration
In this case, PIR Reviewer (Christian Marnell) with generic configuration (Scenario I) and the PIR Reviewer (Fredrick Norton) with the specific configuration (Scenario II) will get PIR notification.
Use Case II - The configured PIR Reviewer has Analyst access to the same Workgroup as configured in CR configuration. The following example illustrates the same:
Change Record Configuration
The following is a sample screenshot of a CR configuration with Owner Workgroup as IT Infrastructure, Category as Medium, Change Category as Hardware, Change Type as Normal, Assigned Workgroup as CMDB Workgroup and Tenant as Information Technology.
Figure: CR Details page - Configuration
PIR Reviewer Configuration
The following is a sample screenshot of a specific configuration for PIR Reviewer with Change Type as Normal, Category as Medium, Workgroup as CMDB Workgroup, Change Category as Hardware and PIR Reviewer as Fredrick Norton who has got Analyst access to CMDB Workgroup.
Figure: Figure: PIR Details page - Specific Configuration
In this case, the PIR Reviewer (Fredrick Norton) who belongs to the CMDB Workgroup (Assigned Workgroup of CR) will be getting the PIR notification and will be able to perform the PIR review.
Use Case III - The configured PIR Reviewers do not have Analyst access to the same Workgroup as configured in CR configuration. The following example illustrates the same:
Change Record Configuration
The following is a sample screenshot of a CR configuration with Owner Workgroup as IT Infrastructure, Category as Medium, Change Category as Hardware, Change Type as Normal, Assigned Workgroup as CMDB Workgroup and Tenant as Information Technology.
Figure: CR Details page - Configuration
PIR Reviewer Configuration
The following is the sample screenshot of specific configuration for PIR Reviewer with Change Type as Normal, Category as Medium, Workgroup as HR Import, Change Category as Hardware and PIR Reviewer as Ryan and William James. The Workgroups CMDB Workgroup and HR Import belongs to the same Tenant Information Technology.
Figure: Figure: PIR Details page - Specific Configuration
In this case, the PIR Reviewers (Ryan and William James) do not have Analyst access to the CMDB Workgroup (Workgroup configured in CR), but has got Analyst access to the HR Import. Now, as the workgroups CMDB Workgroup and HR Import belongs to the same Tenant Information Technology, the PIR Reviewers (Ryan and William James) will be getting the PIR notification and will be able to perform the PIR review.
Use Case IV - The Workgroup is not defined for PIR Reviewer configuration. The following example illustrates the same:
Change Record Configuration
The following is a sample screenshot of a CR configuration with Owner Workgroup as IT Infrastructure, Category as Medium, Change Category as Hardware, Change Type as Normal, Assigned Workgroup as CMDB Workgroup and Tenant as Information Technology.
Figure: CR Details page - Configuration
PIR Reviewer Configuration
The following is the sample screenshot of specific configuration for PIR Reviewer with Change Type as Normal, Category as Medium, Workgroup as Select, Change Category as Hardware and PIR Reviewer as Ryan and William James who do not have Analyst access to CMDB Workgroup, but has got Analyst access to different Workgroups which belongs to the same Tenant Information Technology.
Figure: Figure: PIR Details page - Specific Configuration
In this case, the PIR Reviewers (Ryan and William James) having Analyst access to any Workgroup of the same Tenant (Information Technology) will be getting the PIR notification and will be able to perform the PIR review.
Use Case V - The PIR Reviewer configuration does not match exactly with CR configuration. The following example illustrates the same:
Change Record Configuration
The following is a sample screenshot of a CR configuration with Owner Workgroup as IT Infrastructure, Category as Large, Change Category as Hardware, Change Type as Normal, Assigned Workgroup as CMDB Workgroup and Tenant as Information Technology.
Figure: CR Details page - Configuration
PIR Reviewer Configuration
The following is the sample screenshot of specific configuration for PIR Reviewer with Change Type as Normal, Category as Medium, Workgroup as HR Import, Change Category as Hardware and PIR Reviewer as Ryan and William James who do not have Analyst access to CMDB Workgroup, but has got Analyst access to HR Import. The Workgroups CMDB Workgroup and HR Import belongs to the same Tenant Information Technology.
Figure: Figure: PIR Details page - Specific Configuration
In this case, the PIR Reviewer configuration does not match exactly with CR configuration as Category parameter is different for both the configurations. Hence, the PIR Reviewers, (Ryan and William James) will not be getting the PIR notification and will not be able to perform the PIR review.
ACTIONS
This section explains all the icons displayed on the ACTIONS panel of the PIR REVIEWER page.
SHOW LIST
Click SHOW LIST to display the LIST table showing all the configured PIR Reviewer for the selected Tenant.
Figure: PIR Reviewer: List page
Field Description
The following table describes the fields on the PIR REVIEWER LIST page:
Field | Description |
|---|---|
LIST | |
| ID | Displays the PIR Reviewer ID. To edit a PIR Reviewer, click the ID hyperlink. Make the appropriate changes and click SUBMIT. |
Change Type | Displays the change type of the PIR Reviewer. |
Category | Displays the category of the PIR Reviewer. |
| Workgroup | Displays the workgroup of the PIR Reviewer. |
| Change Category | Displays the change category of the PIR Reviewer. |
| PIR Reviewer | Displays the names of the PIR reviewers. Click more hyperlink to view the all names if PIR reviewers are multiple. A sample screenshot is shown below:
|
| Active | Indicates if the PIR Reviewer is active or not. |
| Include Inactive | Select the Include Inactive check box to include the inactive PIR Reviewers. |
Note:
When the PIR Reviewers are displayed under the LIST table, ADD NEW action is displayed on the ACTIONS panel. Click ADD NEW to configure a new PIR Reviewer.
Confluence Cloud Migration Alert: Please refer to known issues you may encounter in Confluence Cloud: https://eitdocs.atlassian.net/wiki/x/wDGwAQ