Customer Fixed Issues and Known Issues Sierra SP1 HF16

Owned by Enterprise IT
Last updated: Apr 22, 2024 by Mayuresh Balaji Kamble (Unlicensed)Version comment
8 min read

 Previous Versions: << Sierra << Sierra HF01 << Sierra SP1 << Sierra SP1 HF01 << Sierra SP1 HF02 << Sierra SP1 HF03 << Sierra SP1 HF04 << Sierra SP1 HF05 << Sierra SP1 HF06 << Sierra SP1 HF07 << Sierra SP1 HF08 << Sierra SP1 HF09 << Sierra SP1 HF10 << Sierra SP1 HF11 << Sierra SP1 HF12 << Sierra SP1 HF13 << Sierra SP1 HF14 << Sierra SP1 HF15

What's New? | Customer Fixed Issues and Known Issues | Prerequisites | Installation, Configuration, and Upgrade

On this page: Customer Fixed Issues | Known Issues 

Customer Fixed Issues 

This section describes the issues reported by the customers and their fixes in Sierra SP1 HF16. The bug fixes for the bugs found in the following versions are also merged with this release. Please refer to the respective Release Notes for details.

Issue #Issue DescriptionScenarioResolution

87029

The Password Management feature was not working with the OTP option when GDPR was enabled.

NA

Now, the Password Management feature is working with the OTP option when GDPR is enabled.

87037

Earlier, the License Expiry Alert e-mail was sent to the users who had access to Admin pages under any modules.

NA

Now, the License Expiry Alert e-mail is sent to the users who have access to Admin pages under Admin module or Admin Reports only.

85986When a user clicks ‘Met/Missed’ hyperlinks in the table, no data appears on the SR SLA by Customer Report page. This issue occurs if the ‘From Date’ and ‘To Date’ have the same selections in the Filters option.Now, the data is fetched and appears when the user clicks the ‘Met/Missed’ hyperlinks from the table on the SR SLA by Customer Report page.
83773

After the application upgrade from v5.6SP2HF10B006 to SIERRaA SP1 HF08, the Tile view on the Change Management List page was not loading.

NA

This issue now fixed and the Tile view is being loaded on the Change Management List page.

85561

The changes done to the contract were not displayed under the General tab upon reopening the contract ID however,  the changes are captured in the Version History tab.

This issue was observed after user had edited and saved an existing contract and a success message “ Saved successfully” was displayed.

Now, all the changes done to the contract are displayed under the General tab as well as under Version History tab.

80680

For the non-fixed assets (accessories), in the Asset Allocation form, under the Other Asset Details, the details of the accessories that are allocated to User were not displayed.

NA

Now, in the Asset Allocation form, under the Other Asset Details, the details of the accessories that are allocated to User and Asset are displayed.

85482

The application was picking the From Name and From E-mail Id values from the Summit Web.config file even though these fields were already configured on the SMTP CONFIGURATION page.


This issue was observed when the From Name And From E-mail Id values are defined at front end Application level and Web.Config file. 

Now, the application picks the From Name and From E-mail Id values that are configured on the SMTP CONFIGURATION page. If these values are not configured on the SMTP CONFIGURATION page then the application picks these values from the Summit Web.config file.


87033After creating the user from the NEW USER page, the GDPR compliant fields were shown as plain text in the ADM_Configuration_History table even though the GDPR was enabled in the application.NA

Pre-requisites 

Execute the following script  only when GDPR is enabled and

ADM_Configuration_History  table has existing data. 

Resolution 

Now, in the  ADM_Configuration_History table the GDPR compliant fields are shown in the encrypted format.

Known Issues 

This section describes the known issues detected by the SummitAI Dev and QA team in the release, Sierra SP1 HF15.

Issue

In the Asset Depreciation by Category Report, depreciation amount is not getting debited from Opening Balance for Vehicle category and hence the depreciation calculation is incorrect.

Note: This issue occurs only for quarterly or monthly basis for Asset Depreciation by Category Report.

(# 86182)

The parent and child value mapping is getting reset to blank when a user includes the Inactive Option from the INACTIVE FIELDS pop-up page of the FORM BUILDER page. Also, the user is not able to save the selected parent and child mapping after modifying it manually. (#75967)

Workaround:

To include the Inactive Options, do the following steps:

  1. Include the inactive options (Inactive fields >  Select Options tab > Include the Inactive Options).
  2. Map the options with the Parent and click NEXT.
  3. Click SAVE.
  4. Open the same Form again.
  5. Map the parent and child and click NEXT
  6. Click SAVE.

When you add a new label in the network topology (View) then the complete view is Zooming Out to a certain level. It displays the devices in smaller size rather than the actuals. But after saving the View, it displays the devices in normal size.

Note: This issue is not occurring every time. It only occurs when there are 2 to 4 devices in the view having discovered link between 2 devices. (#86191)

After saving network topology, the devices which are present in view are slightly changing its position even if you specify correct co-ordinates.

Note: This issues occurs when all the devices are plotted in one side of the view. (#86377)

The Child drop-down value is displaying even though the Parent drop-down is not selected on the New Incident or New Incident For User page. This issue occurs when the Options value is selected other than Manual while configuring the Parent in the Parent and Child drop-down fields on the FORM BUILDER page. (#73236) 

Note:

The same issue was found for the Service Request Management module. The following bug reproduction steps are given for the Incident Management module. 

Bug Reproduction Steps:

  1. Log into the Application as an Administrator.
  2. Select Admin > Basic > Infrastructure > Form Builder.
  3. Select the Tenant and Module as Incident Management.
  4. Select the ADDITIONAL INFORMATION AREA or GENERAL AREA and click ADD NEW on the ACTIONS panel.
  5. Click NEXT.
  6. Under the FORM BUILDER tab, click or drag and drop the Dropdown control.
  7. Select the Option as Common Master or other type except for the Manual.
  8. Click or drag and drop the Dropdown control and name is as State. Select the Parent as Country and Option as Manual.
  9. Select the Country and add the State for it and select a State as Default for the Country.
  10. Click or drag and drop the Dropdown control and name it as City. Select a State under the Parent field and Option as Manual.
  11. Select the State and add the Cities for it and select a City as Default for the State.
  12. Click NEXT.
  13. Under the PREVIEW tab, ensure all the custom fields, and click SAVE.
  14. Configure the Location field on the LOG INCIDENT PAGE. For more information, see Configuring Log Incident Page.
  15. Select Incident > User > New Incident or Incident > User > Manage Incidents > New Incident for User.
  16. Select Incident > User > New Incident (or) User > Manage Incidents > New Incident for User.
  17. On the New Incident or New Incident For User page, select the Tenant for which the Custom attribute is configured on the FORM BUILDER page.
  18. Configured Child values are displaying even though the Parent field value is not selected.

The previous Asset transaction details are not displayed under the Previous Transaction drop-down list on the PREVIOUS IMPORT DETAILS page (Asset > User > Manage Assets > Import > Import Asset > Specify all the details > Click SUBMIT), even though the Assets are approved by the Checker on the MAKER-CHECKER ASSET-APPROVAL page (Asset > User > Manage Assets > Approvals > Maker Checker Approval > Click Filters  on the ACTIONS panel > Specify the filter criteria to view the list of requests from the Maker > Select the Assets that you want to approve under the LIST section > Click APPROVE on the ACTIONS panel > Select the  Approval Status as Approved.) This issue is found when the Asset Maker Checker Configurations is enabled.

(#67240)

When a user opens any page in a new tab in the SaaS Environment, the Switch Tenant pop-up is displayed in all the pages. This issue occurs only when the user is using the Firefox private window/tab. (#72276)

On the ADMIN DETAILS page (Admin > Advanced > Password Management > Administrator > Click ADD NEW on the ACTIONS panel > Specify all the details > Click SUBMIT > Select the Domain Name on the LIST page), the Password field is not displaying the GUID or Encrypted ID of the password and the field is empty. This issue is found when the user is logging into the SummitAI application using Microsoft Internet Explorer browser.

On the Incident Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Incident Management > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.

On the Service Request Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Service Request > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and Multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.

The configured Bulletin Board (Admin > Advanced > Notifications > Bulletin Board > Select the Tenant > Click ADD NEW to configure the Bulletin details > Click SUBMIT) is displayed on the END USER DASHBOARD page even if the user does not have access to the selected Tenant and Domain.

Overlapping of content is observed on the Pagination bar of all the pages having high amount of data (typically in the range of 5 digits).

Broken image of the logo is displayed in the application when the logo image is deleted from the APPLICATION SETTINGS page (Admin > Basic > Infrastructure > Application Settings).

Workaround: The users need to re-login to the SummitAI application after deleting the logo.

On the AUTO-RESOLUTION SERVICE REQUEST CONFIGURATION and AUTO-RESOLUTION INCIDENT CONFIGURATION page (Admin > Basic > Infrastructure > Tenant > Select Domain > Select Tenant which is configured with Service Request/ Incident Management module > Click CONFIGURE DETAILS on the ACTIONS panel > Under the For End Users tab, select a reason form the Enable Reminder to Callers for Pending Reasons drop-down list > Enable Auto-Resolve Service Requests/ Auto-Resolve Incidents check box > Click Set Fields for Auto-Resolving Service Requests/ Set Fields for Auto-Resolving Incidents link), the users can set the auto-resolution criteria by specifying only white space (not numbers and alphabets) in the Response SLA Reason, Resolution SLA Reason, and Solution fields.

The following issues are observed in BI Custom Reports:

  • When a user downloads the report (in any format), the data is displayed with hyperlinks.

  • When a user places the mouse cursor on the count link, the tooltip is displayed as [Object Object].

  • In the exported report, report name is displayed with '+' instead of space.

The Change Record is not created when the CR Requester and Customer Approver are same. This issue occurs even though Do Not allow Customer Approval of CR check box is selected on the Change Management TENANT configuration page. This issue occurs only for the first time when the Tenant is configured.

Workaround: The Administrator needs to unselect and again select the Do Not allow Customer Approval of CR on the Change Management TENANT configuration page (Admin > Basic > Infrastructure > Tenant > Select the respective Tenant for which this issue is occurring > Click CONFIGURE DETAILS on the ACTIONS panel > Enable Do Not allow Customer Approval of CR check box and click SUBMIT > Clear Do Not allow Customer Approval of CR check box and then click SUBMIT, again).

The new SLA Value of an Incident is not displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident) when an incident is moved from New status to In-Progress using Notification Services.

The Pending Reason of an incident is still displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident), when an Orchestration Script fails and the respective Incident is moved back from Pending to In-Progress.

The notification e-mails related to escalation and jobs are triggered only in English language irrespective of the configured language on the NOTIFICATION TEMPLATE page for all the modules (Admin> Advanced> Notification> Notification Template> Select a Tenant > Click ADD NEW > Specify all the required fields > Click SUBMIT).