Configuring VLAN

Owned by Aravind Naik (Unlicensed)
Last updated: Apr 23, 2024 by Mayuresh Balaji Kamble (Unlicensed)Version comment
 Administrators
 Basic

A Virtual Local Area Network (VLAN) is a group of devices on one or more LANs that are configured to communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, they are extremely flexible.

VLANs define broadcast domains in a Layer 2 network. A broadcast domain is the set of all devices that will receive broadcast frames originating from any device within the set. Broadcast domains are typically bounded by routers because routers do not forward broadcast frames. Layer 2 switches create broadcast domains based on the configuration of the switch. Switches are multiport bridges that allow you to create multiple broadcast domains. Each broadcast domain is like a distinct virtual bridge within a switch.

To Configure VLAN:

  1. Select Admin>Basic>Infrastructure>VLAN Configuration. The VLAN CONFIGURATION page is displayed.

    VLAN Configuration page
    Figure: VLAN Configuration page

  2. On the VLAN CONFIGURATION page, fill in the required details, and then, click SUBMIT. The VLAN is added and displayed in the LIST section below. For more information about the fields on the VLAN CONFIGURATION page, see Field Description.

Note:

  • The Summit agent connects to summit proxy based on client IP. If you map an IP to the proxy, and the primary and secondary url in the subnet range are specified, the Proxy Server directs the agent to connect to its nearest proxy server.
  • To access the current location of the proxy IP address, enable Change Asset Agent Proxy Server job in the CUSTOM SCHEDULER page. For more information on how to configure jobs in the CUSTOM SCHEDULER page, see Configuring Custom Scheduler.

Field Description

The following table describes the fields on the VLAN CONFIGURATION page:

Field

Description

DETAILS

Tenant

Select a Tenant to configure the VLAN.

VLAN Name

Specify a name for the VLAN.

Location

Select the location to which you want to configure the VLAN.

Subnet Range

Enter the Subnetwork Range to configure the LAN.

Primary proxy URL

Enter the Primary Proxy URL to configure the LAN.

Secondary Proxy URL

Enter the Secondary Proxy URL to configure the LAN.

Active

If selected, the VLAN configuration becomes active.