Customer Fixed Issues and Known Issues Denali SP1 HF18

The reports under Asset dashboard in the IT Asset management displayed “Oops an error occurred” message.  

 The following reports displayed the error message: 

1. Allocated Pending Return 
2. Asset contacted before 30 days 
3. Warranty about to expire in 30 days 

Steps: 

1. Log in to SUMMIT Application.
2. Navigate to Dashboard> Asset Dashboard.  
3. Select the Tenant.  
4. Navigate to Others option at the bottom of the page. 
5. Select Allocated Pending Return, Asset contacted before 30 days, Warranty about to expire in 30 days reports and click on the hyperlink count. It should have greater than 0 count.
6. Verify if any Oops error is being displayed.

102509 

Whenever the user searched the ‘Inactive’ assets on the Search Asset pop-up, it displayed the “Inactive” assets with incorrect status in the Allocation Status column.  

Example:  

Instead of “Inactive” status, it used to display as “Instore.” 

Steps: 

1. Navigate to Asset > User > Manage Assets > Asset Inventory > Select the Asset Type.  
2. Click Search Assets.  
3. Specify the 'Inactive' asset in the search field and click search on the Search Asset pop-up.  
4. Check the Allocation Status column, and it displays as "Instore." 

If a user searches for the ‘Inactive’ status assets, it displays the “Inactive” assets with the same status in the Allocation Status column. 

102694 

Performance issue was observed while loading the Task List page of Change Management module. 

Steps: 

1. Navigate to Change > User > Task List > Select the Task ID. 
2. Modify and Submit the Task. 
3. Click the Change Record link from the Change Record field of the Task ID page. 
4. Specify values in the Logs tab of the Change Record Details page and submit. 
5. Reload/open the Task List page again. 

The performance is increased, and no issue occurs in loading the Task List page. 

When the user tried to edit any records that existed in the Asset Integration Configuration page with monitoring source as “SummitAI server”, notification type displayed as “Failed”. 

Steps: 

1. Log in to SUMMIT Application. 
2. Navigate to Asset > Other >Asset Integration.  
3. In the Filter, select Tenant as Information Technology. 
4. Click SUBMIT. 
5. Asset Integration Configuration page will be displayed where All the SCCM configuration which are configured are shown. 
6. Edit any record with Monitoring Source as “SummitAI Server” Notification Type as “Failed”. 

Device down Incidents were resolving automatically without solution and closure code. 

Prerequisite:

Entities (Network devices, Network Links or Servers) are monitored for different status. If any violation of thresholds exists for the above parameters, then an event Incident will be created based on configuration ticket.

Steps: 

1. Navigate to Operations > Configuration > General > Master Settings 

or

2. Navigate to Operations >  User > Views > Common Device View > Server Details > Edit Server 

or

3.Navigate to Operations >  User > Views > Network Device View > Edit Device 

or

4. Navigate to Operations >  User > Views > Network View > Click a link > Edit NETWORK LINK DETAILS.

5.Deactivate the device that was added for monitoring and open events must be existing. 

Prerequisites 

The links between devices must be created. Example: Link between Device A (Source Interface) and Device B (Destination Interface) is created. 

Steps: 

1.Navigate to Operations > Configuration > General > Master settings. 

2.Select Tenant and Device Type.

3.Deactivate the link created earlier and SUBMIT.

4.Create link between the  with different source interface and the same destination.

5.Navigate to Master Settings and deactivate the link. 

6.Create link between same devices with different source interface and same destination interface and Save. 

7.Open the link and try modifying any parameter like Link Capacity and Save.

When the Maker-Checker configuration is enabled for the Allocate action and Maker-Checker approval matrix is configured with two levels of approval, on sending the Allocated Assets for Checker’s approval, the following issues are observed:

On the FIXED ASSET page (Asset > User > Manage Asset > Asset Inventory > Click the FIXED icon under the SELECT THE ASSET TYPE section > Click FILTERS on the ACTIONS panel > Select Status as Allocated and provide data in all the other fields > click SUBMIT), duplicate Assets are displayed after the Checker approves the Assets sent for approval.

The Assets do not move to the second level of approval after the Assets are approved by the first level of Approver.

Prerequisites

Enable Maker-checker approval for Asset Allocate transaction. (Admin> Basic > Infrastructure > Tenant > Click Filters on the ACTION panel and select the Domain and click SUMBIT > On the TENANT page under the LIST section, select the Tenant for which you want to enable Maker Checker > Click CONFIGURE DETAILS on the ACTIONS panel > Click Asset Management under the MODULES section > select the check box of Enable Maker-Checker > Select Actions for Maker-Checker to Approve as  Allocate > Select the End Time value and click SUBMIT).

Configure No. of Approval level as 2 on the APPROVAL MATRIX page (Asset> Configuration > Others > Approval Matrix > On the ACTIONS panel, click ADD NEW > Specify the details > click SUBMIT).

Send Assets for approval for Allocate action (Asset > User > Manage Asset > Asset Inventory > On the ASSET INVENTORY page, under the SELECT THE ASSET TYPE section, click FIXED > Select the same Tenant for which the Maker-checker is enabled >  Click the In-Store hyperlink of the required Asset Category > Select the check box corresponding to the Asset you want to allocate > On the ACTIONS panel, click ALLOCATE > Specify the mandatory details to allocate the Asset and click SUBMIT).

Bug Reproduction Steps:

Login to the Application as Checker.

Click Asset > User > Manage Asset > Approvals Maker-checker Approval > Click Filters on the ACTIONS panel.

On the Filter pop-up page, select the Tenant and specify the required details.

Select the Assets that you want to approve and click APPROVE icon on the ACTIONS The APPROVE pop-up page is displayed.

On the APPROVE pop-up page, select the Approval Status as Approved to approve the Asset and click

Click Asset > User > Manage Asset > Asset Inventory > Click FIXED under the SELECT THE ASSET TYPE section > Click Filters on the ACTIONS

On the Filters pop-up page, select the Tenant, Select the Status as Allocated and specify required details.

Click SUBMIT.

Validate the data.

The GetBulletinBoard Mobile API request is used to retrieve Bulletin Board information. The User ID and Tenant Code are passed as the Request Parameters. In the API Response, instead of displaying the Bulletin Board information for the specific User ID and Tenant, the Bulletin Board information for all the Tenants is displayed. (#73031)

Prerequisites:

Configure Bulletin Boards for multiple Tenants.

Bug Reproduction Steps:

Log into the Application as an Administrator.

Configure a Bulletin Board. For more information, see Configuring Bulletins.

Send a POST request for the GetBulletinBoard API. Pass Tenant Code, in the Instance parameter and User ID in the UserID parameter.

Check API Response, instead of displaying the Bulletin Board information for the specific User ID and Tenant, the Bulletin Board information for all the Tenants is getting displayed.

On the ACTION DETAILS pop-up page, the Target ID is not showing in the Target column when Status of the Orchestration Workflow Script (other than the first Script) is In-Progress, and it is having Target Host Type mapped to From Previous Output value. However, the Target ID is displayed after the Script is executed successfully. (#73079)

Note: This issue is found in Incident Management, Work Order, and Service Request Management (SR) modules. Following bug reproduction steps are for the SR module:

Bug Reproduction Steps:

Log into the Application as an Administrator.

Select Admin > Advanced > Automation > Orchestration.

On the WORKFLOW LIST page, click the NEW

On the WORKFLOW CONFIGURATION pop-up page, select Module as Service Request, and specify other details to configure the Orchestration Workflow.

Map the Target Host Type to From Previous Output value for the scripts of the Orchestration Workflow.

Log out and log into the Application as an Administrator or as an Analyst.

Select Request > Manage Service Requests > Service Request List.

On the SERVICE REQUEST LIST page, specify the Filters and open an SR.

On the SERVICE REQUEST DETAILS page, click the ORCHESTRATION tab.

On the ORCHESTRATION tab, click the Script When the Script (other than the first Script) is in In Progress status, check the Target column details on the ACTION DETAILS pop-up page. The Target ID is not displaying in the Target column.

After successful execution of the Script (other than the first Script), click the Script hyperlink. Check the Target column details on the ACTION DETAILS pop-up page. Now, the Target ID is displaying in the Target column.

The previous Asset transaction details are not displayed under the Previous Transaction drop-down list on the PREVIOUS IMPORT DETAILS page (Asset > User > Manage Assets > Import > Import Asset > Specify all the details > Click SUBMIT), even though the Assets are approved by the Checker on the MAKER-CHECKER ASSET-APPROVAL page (Asset > User > Manage Assets > Approvals > Maker Checker Approval > Click Filters  on the ACTIONS panel > Specify the filter criteria to view the list of requests from the Maker > Select the Assets that you want to approve under the LIST section > Click APPROVE on the ACTIONS panel > Select the  Approval Status as Approved.) This issue is found when the Asset Maker Checker Configurations is enabled.

(#67240)

On the ADMIN DETAILS page (Admin > Advanced > Password Management > Administrator > Click ADD NEW on the ACTIONS panel > Specify all the details > Click SUBMIT > Select the Domain Name on the LIST page), the Password field is not displaying the GUID or Encrypted ID of the password and the field is empty. This issue is found when the user is logging into the SummitAI application using Microsoft Internet Explorer browser.

On the Incident Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Incident Management > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.

On the Service Request Management FORM BUILDER page (Admin > FORM BUILDER > Select a Tenant > Select Module as Service Request > Click Add on Actions panel> Select Display At as Additional Information or General Area or TFS Area > Click Next), when a user configures single Parent and Multiple Child using Common Master, the collective values of both Child 1 and Child 2 are displayed in Child 1 and Child 2 drop-down lists.

The configured Bulletin Board (Admin > Advanced > Notifications > Bulletin Board > Select the Tenant > Click ADD NEW to configure the Bulletin details > Click SUBMIT) is displayed on the END USER DASHBOARD page even if the user does not have access to the selected Tenant and Domain.

Overlapping of content is observed on the Pagination bar of all the pages having high amount of data (typically in the range of 5 digits).

Broken image of the logo is displayed in the application when the logo image is deleted from the APPLICATION SETTINGS page (Admin > Basic > Infrastructure > Application Settings).

Workaround: The users need to re-login to the SummitAI application after deleting the logo.

On the AUTO-RESOLUTION SERVICE REQUEST CONFIGURATION and AUTO-RESOLUTION INCIDENT CONFIGURATION page (Admin > Basic > Infrastructure > Tenant > Select Domain > Select Tenant which is configured with Service Request/ Incident Management module > Click CONFIGURE DETAILS on the ACTIONS panel > Under the For End Users tab, select a reason form the Enable Reminder to Callers for Pending Reasons drop-down list > Enable Auto-Resolve Service Requests/ Auto-Resolve Incidents check box > Click Set Fields for Auto-Resolving Service Requests/ Set Fields for Auto-Resolving Incidents link), the users can set the auto-resolution criteria by specifying only white space (not numbers and alphabets) in the Response SLA Reason, Resolution SLA Reason, and Solution fields.

The following issues are observed in BI Custom Reports:

When a user downloads the report (in any format), the data is displayed with hyperlinks.

When a user places the mouse cursor on the count link, the tooltip is displayed as [Object Object].

In the exported report, report name is displayed with '+' instead of space.

The Change Record is not created when the CR Requester and Customer Approver are same. This issue occurs even though Do Not allow Customer Approval of CR check box is selected on the Change Management TENANT configuration page. This issue occurs only for the first time when the Tenant is configured.

Workaround: The Administrator needs to unselect and again select the Do Not allow Customer Approval of CR on the Change Management TENANT configuration page (Admin > Basic > Infrastructure > Tenant > Select the respective Tenant for which this issue is occurring > Click CONFIGURE DETAILS on the ACTIONS panel > Enable Do Not allow Customer Approval of CR check box and click SUBMIT > Clear Do Not allow Customer Approval of CR check box and then click SUBMIT, again).

The new SLA Value of an Incident is not displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident) when an incident is moved from New status to In-Progress using Notification Services.

The Pending Reason of an incident is still displayed on the CHANGE HISTORY pop-up page (Incident > User > Manage Incidents > Incident List > Select the required Incident ID from the list > Click CHANGE HISTORY on the ACTIONS to view the change history of the selected Incident), when an Orchestration Script fails and the respective Incident is moved back from Pending to In-Progress.

The notification e-mails related to escalation and jobs are triggered only in English language irrespective of the configured language on the NOTIFICATION TEMPLATE page for all the modules (Admin> Advanced> Notification> Notification Template> Select a Tenant > Click ADD NEW > Specify all the required fields > Click SUBMIT).